making a pvc fleshing beam
Page 1 of 1
making a pvc fleshing beam
making a pvc fleshing beam
Built this today and thought I would share. I wish I could take credit for the design but I can't. I got it from another forum that I frequent. Anyway here it is with a few of the beams that interchange with it. The frame is made from pressure treated 2X4s. The beams are made from 10" PVC. I wanted 12" but the 10" I got for free. I used the FHA fur handlers guide to get the measurements for the 4 beams I made. They are otter, coon, coyote, and bobcat. I just used the measurements required on wood stretchers for each animal. Hope this gives some ideas.
Built this today and thought I would share. I wish I could take credit for the design but I can't. I got it from another forum that I frequent. Anyway here it is with a few of the beams that interchange with it. The frame is made from pressure treated 2X4s. The beams are made from 10" PVC. I wanted 12" but the 10" I got for free. I used the FHA fur handlers guide to get the measurements for the 4 beams I made. They are otter, coon, coyote, and bobcat. I just used the measurements required on wood stretchers for each animal. Hope this gives some ideas.
southernlures- Admin
- Posts : 42
Join date : 2010-12-30
Age : 65
Location : alabama
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|